Software Development

Modelling Microservice Patterns in Code

Service Interactions

There is a number of simple interactions a service can support. Which pattern is best for your application can depend on what an existing application expects, and what latency requirements you have. Broadly speaking these interactions fall into client-server and peir-to-peir messaging.

For peir-to-peir messaging, one approach to take is Lambda Architecture however from supporting GUIs, client – server models can be easier to work with.

I feel it is important to design components which could be tested and debugged together, as in a monolith, but can be deployed as multiple right sized services to different threads, JVMs, or machines.

Client-Server Messaging

Client-Server messaging is often used in a synchronous way. Asynchronous messaging can support multiple concurrent requests, reducing the cost of network latency and increasing throughput. Asynchronous messaging can perform best when it is latency, rather than network bandwidth which is your limiting factor.

Using a human readable protocol

It is useful to be able to see the underlying messages in readable text. I suggest using either text or a binary format which can be automatically converted to text to make it easy to check the data sent. I suggest using YAML as the human readable format as;

  • it is designed to be human readable instead of a subset of another language/format.
  • it supports messages, types and comments.
  • it can be sent as binary for performance and converted to text as required

A human readable format allows you to quickly determine whether it is the sender or receiver which is behaving incorrectly. It can allow you to see and stop undesirable behaviour which doesn’t show up in a test. e.g. are there too many heartbeats.

Request/Response

The client sends a message to a server. That message contains a message type to choose an action to perform on the server and usually includes a payload of data. The response is usually just data.

For every message the client sends the server, it response with a single message. Often the client waits for the response, however the client can process the response asynchronously to improve throughput.

Request-Response

With asynchronous response processing, the client can send multiple requests over the same channel rather than wait for each one to complete.

Synchronous server with synchronous client

interface OneRequestResponse {
    Response requestType(RequestData data);
}

Synchronous server with asynchronous client

interface OneRequestResponse2 {
    void requestType(RequestData data, Consumer<Response> responseConsumer);
}

Using this API could be translated into YAML such as

Synchronous server with synchronous or asynchronous client

# client sends to server
---
requestType: {
  data: 1,
  text: my text
}

# server sends to client
---
reply: !MyResponse {
  moreData: 128,
  message: Success
}
...

Request/Proxy

This is like request/response, except the object returned is a proxy for further events. This is useful when the value returned represents a complex, or very large object.

Request-Proxy

This is used in Map returning a key set or values which is a proxy to the underlying map.

Method on java.util.Map

public interface Map<K, V> {

    Set<K> keySet();

    Set<Map.Entry<K, V>> entrySet();

    Collection<V> values();
}

Using a proxy gives access to data without having to pass all the data from the server to the client.

Method on java.util.Map

# client sends to server
--- !!meta-data # binary
csp: /map/my-map?view=map
---
keySet: []
---
entrySet: []
---
values: []

# server sends to client
---
reply: !set-proxy {
   csp: /map/my-map?view=keySet
}
---
reply: !set-proxy {
   csp: /map/my-map?view=entrySet
}
---
reply: !set-proxy {
   csp: /map/my-map?view=values
}

# client sends to server
--- !!meta-data # binary
csp: /map/my-map?view=keySet
--- !data # binary
size: []
---

# server sends to client
---
reply: 128000 (1)

# client sends to server
--- !!meta-data # binary
csp: /map/my-map?view=keySet
--- !data # binary
remove: "key-111"
---

# server sends to client
---
reply: true (2)
...
1no need to send 128,000 keys just to determine how many there was.
2key was removed on the server, not a copy sent to the client.

Request/Callback

The client sends a message to a server. That message contains information to call an action on the server and usually includes a payload of data. The callback is also a message containing an action and data.

This is like a Subscription except that exactly one event is expected to be returned.

Request-Callback

The use of a callback provides a richer interaction between the caller and callee.

Synchronous server with a callback

interface OneCallback {
    void resultOne(ResultOne result);

    void resultTwo(List<ResultOne> results);

    void errorResult(String message);
}

interface OneRequestCallback {
    void requestType(RequestData data, OneCallback callback);
}

The client could be configured to either wait for the server to call the callback, or handle the callback asynchronously. The thread which performs the method in the callback will be on the client side.

Synchronous server with a callback

# client sends to server
---
requestType: {
  data: 1,
  text: my text
}

# server sends to client
---
resultTwo: [
  {
      moreData: 128,
      message: Success
  },
  {
      moreData: 1111,
      message: Failure
  }
}
...

Request/Visitor

The client sends one or two visitors to the server to apply to local objects or actors. This visitor can be an update which applied atomically to an actor, and/or a vistor can be applied to retrieve specific information.

Request-Visitor

Pass a function to apply on a server for a given key

interface KeyedResources<V> {

    void asyncUpdate(String key, Visitor<V> vistor);

    <R> R syncUpdate(String key, Visitor<V> updater, Function<V, R> returnFunction);

}

This approach allows the caller to apply an operation to an actor without needing to know where that actor is.

Pass a function to apply on a server for a given key

# client sends to server
---
asyncUpdate: [
    "key-5",
    !MyVisitor { add: 10 }
]
# no return value
--- # subtract 3 and return x * x
syncUpdate: [
    "key-6",
    !MyVisiitor { add: -3 },
    !Square { }
];

# server sends to client
---
reply: 1024
...

Request/Subscription

By requesting a subscription, a client can receive multiple asynchronous events. This can start with a bootstrap of existing information, followed by live updates.

Once a subscription ahs been made, it should be altered, or cancelled

Request-Subscription

Pass a function to apply on a server for a given key

interface Queryable<E> {

    <R> Subscription<E, R> subscribe(Filter<E> filter, Function<E, R> returnMapping, Subscriber<R> subscriber);

}

interface Subscription<R> {
    // change the current filter.
    void setFilter(Filter<E> newFilter);

    void cancel();
}

Up to this point, all the message are actions lived with a single response. In Chronicle-Engine, we associate a csp or Chronicle Service Path for each actor, and a tid or Transaction ID with each operation. This allows multiple concurrent actions to different actors. This routing information is passed in meta data, with the actions for that destination following

Pass a function to apply on a server for a given key

# client sends server
--- !!meta-data # binary
csp: /maps/my-map
tid: 12345
--- !!data # binary
subscribe: [
   !MyFilter { field: age, op: gt, value: 18 },
   !Getter { field: name }
]
request: 2 # only send me two events for now.

# server sends client
--- !!meta-data # binary
tid: 12345
--- !data-not-complete # binary
reply: Steve Jobs
--- !data-not-complete # binary
reply: Alan Turing

# client sends server
--- !!meta-data # binary
tid: 12345
--- !data # binary
cancel: []

# server sends client
--- !!meta-data # binary
tid: 12345
--- !data # binary
cancelled: "By request"
...

Client Injected Handler

This approach allows the client to version and configure which handlers are used on the server on the client’s behalf. In particular, this is useful when supporting multiple versions of clients concurrently.

Client-Injected-Handler

Client passes a handler to intergate with the server and act it’s behalf

interface AcceptsHandler {

    /**
     * The accept method takes a handler to pass to the server.
     * and it returns a proxy it can call to invoke that hdnler on the server.
     */
    <H extends ContextAcceptor> H accept(H handler);
}

A simple example of a handler we use is for heartbeats

# client sends server
--- !!meta-data # binary
csp: /
cid: 1
handler: !HeartbeatHandler {
    heartbeatTimeoutMs: 10000
    heartbeatIntervalMs: 2000
}
...
This allows different clients to be working with dfferent versions of heartbeat handlers at the same time, supporting old and new clients with a single server.

Conclusion

In addition to Lambda Architecture models for back end, peir-to-peir services, we can support a rich set of interactions between clients and servers.

These interactions can be performed without a transport i.e. one component directly calls another to make testing and debugging easier.

Reference: Modelling Microservice Patterns in Code from our JCG partner Peter Lawrey at the Vanilla Java blog.
Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

0 Comments
Inline Feedbacks
View all comments
Back to top button